Chapter 5: Advanced setup
TruVision DVR 10 User Manual
73
Figure 28: PPPoE setup
To use the PPPoE function:
1. Click Advanced Settings on the Network screen to display the Network
Advanced Settings screen.
2. Select an NIC type. Press Confirm to save and return to the Network screen.
3. Enter a port number.
In the Port edit box, use numeric keys to enter the port number. The port
number must be higher than 2000.
4. Enter the IP Server address.
Display the Advanced Settings screen. Enter a fixed Internet IP address
where the IP analyst software (IP Server) is run in the IP Server edit option.
5. Display the PPPoE Setup screen and enter the PPPoE settings.
To display the PPPoE Setup screen, click PPPoE Setup on the Network
screen. This enables PPPoE function. Enter the PPPoE username, password
and verify password that ISP provided.
6. Save your settings.
Click Confirm to save your settings and return to the Network screen. Click
Confirm on the Network screen to return to the main menu. The TVR 10
prompts you to reboot to implement your network changes. In the reboot
process, the TVR 10 starts the dialup using the PPPoE function. If the TVR
10 dialup Internet connection is successful, the TVR 10 displays the dynamic
Internet IP address on the Network screen.
Summary of Contents for TVR-1004-1T
