EN 8
UltraView IP XP4 Dome Day/Night Range Camera
Figure 6: DIP switch layout (back of camera)
Table 1: DIP switch functions (Default in bold)
Switch Description
1. White
Balance
ON
: ATW mode; OFF: PTL mode
2. Backlight
Compensation
ON: BLC on;
OFF
: BLC off
3. Exposure
AI/AE
ON: Auto Exposure (AE) mode;
OFF
: Auto Iris (AI) mode
4. Day/Night
Setting
ON: Black and white mode;
OFF
: Auto Day/Night mode
5. High/Normal
Resolution
ON: High resolution;
OFF
: Normal resolution
6. Flickerless
Control
ON: Flickerless enabled;
OFF
: Normal
Reset to factory default settings
Use the reset button to reset the camera to factory defaults including
camera and network settings. With the camera powered up, press the
red reset button for 10 to 15 seconds. The red LED indicator light
flashes when the reset signal is accepted.
Contact information
For contact information see our Web site: www.interlogix.com
