If within six (6) years from the date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This war-
ranty is extended to the original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or
any negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost
of the product; (e) sealed lamps and/or lamp bulbs, LED’s and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit
damage, initial installation costs, removal costs, or reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE-
QUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRAN-
TIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED
WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the product, along with proof of purchase, postage prepaid to the
authorized service center listed below. This warranty is made by: Intermatic Incorporated/After Sales Service/7777 Winn Rd., Spring Grove, Illinois 60081-9698/815-675-7000 http://www.homesettings.com
Please be sure to wrap the product securely to avoid shipping damage.
INTERMATIC INCORPORATED
SPRING GROVE, ILLINOIS 60081-9698
After including your HA01 In-Wall Receptacle in your Home-
Settings network, you must associate it with a specific control
channel (or pair of
ON/OFF
buttons) so you can operate it by
remote control. For a non-HomeSettings network, follow con-
troller instructions provided by the manufacturer.
Decide which pair of
ON/OFF
buttons you want to use to con-
trol the In-Wall Receptacle. Each pair represents a channel.
Press and hold (at the same time) both
ON
and
OFF
buttons
on the HA07 Master Controller or the HA09 Handy Control-
ler. After about 3 seconds:
The Master Controller screen will display LEARN.
The Handy Controller lights will rapidly flash GREEN and
RED at the same time.
Release the
ON
and
OFF
buttons on the controller.
Press and hold the
INCLUDE
button on the Master Controller
1.
2.
-
-
3.
4.
3 –
ASSOCIATE
the In-Wall Receptacle with a control channel
If necessary, you can delete the HA01 In-Wall Receptacle from
your HomeSettings network—or any network that supports
Z-Wave devices—through a process called EXCLUSION.
Put the controller into EXCLUSION mode. On the HA07
Master Controller or the HA09 Handy Controller, press and
release the
DELETE
button. For other manufacturers’ control-
lers, follow the instructions provided by the manufacturer.
Press the
ON/OFF/PROGRAM
button on the HA01 In-Wall Re-
ceptacle. If the exclusion is successful:
The HA07 screen will display SUCCESSFUL.
The HA09 will show a solid GREEN light for 2 seconds.
If the screen displays NOT SUCCESSFUL or the light is RED,
the exclusion has failed. Try again. If the procedure continues
to fail, contact Intermatic Customer Service.
1.
2.
-
-
Optional:
EXCLUDE
the In-Wall Receptacle from your network
After hard-wiring the HA01 into place, the device is ready to
join your HomeSettings network—or any network that sup-
ports Z-Wave™ devices—through a process called INCLUSION.
NOTE:
Before you begin, devices (such as lamps) should
be plugged in and turned
ON
before including the HA01 in
your network.
Put the controller into INCLUSION mode. On the HA07
Master Controller or the HA09 Handy Controller, press and
release the
INCLUDE
button. For other
manufacturers’ controllers, follow the
instructions provided by the manu-
facturer.
Press the
ON/OFF/PROGRAM
button on
the HA01 In-Wall Receptacle. If the
inclusion is successful:
The HA07 screen will display SUC-
CESSFUL.
The HA09 will show a solid GREEN light for 2 seconds.
If the screen displays NOT SUCCESSFUL or the light is RED,
the inclusion has failed. Try again. If the procedure contin-
ues to fail, contact Intermatic Customer Service.
1.
2.
-
-
2 –
INCLUDE
the In-Wall Receptacle in your network
or the Handy Controller.
The Master Controller screen will display INCL.
The Handy Controller will show a solid GREEN light only.
While still holding the
INCLUDE
button, press the
ON/OFF/PRO-
GRAM
button on the In-Wall Receptacle.
NOTE:
If the GREEN Indicator light on the HA01 is not ON,
press the ON/OFF/PROGRAM button again to turn on the
light before proceeding to Step 6.
Release the
INCLUDE
button. If the association is successful:
The Master Controller screen will display SUCCESSFUL.
The Handy Controller GREEN light will simply turn off.
Test the channel you have just programmed by pressing its
ON
and
OFF
buttons. The light should power ON or OFF.
If the screen displays NOT SUCCESSFUL or the light is RED,
the association has failed. Try again. If the procedure contin-
ues to fail, contact Intermatic Customer Service.
-
-
5.
6.
-
-
7.
Ratings: 15 A, 125 VAC, 50/60 Hz
Operating Temperature Range: 32°F to 104°F / 0°C to 40°C
Radio Operating Frequency: 908.42 MHz
RF (wireless) Range: 50-100 ft. under normal operating conditions
Made in China
•
•
•
•
•
Technical Information
Limited Six-Year Warranty
Federal Communications Commission Statement / Industry Canada Statement
This device complies with part 15 of the FCC rules. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna or device.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTICE — Changes or modifications not expressly approved by Intermatic Inc., could void the user’s authority to operate the equipment.
The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
•
•
•
•
158HA11639
