APPENDIX A
Sample Configuration Files
PEN*KEY
R
6200/6300 Hand-Held Computer Programmer’s Reference Guide A-7
REM ^^^^^^^^^^^^^^^^^^EXTENDED MEMORY PROVIDER^^^^^^^^^^^^^^^^^^
REM ___________________UPPER MEMORY PROVIDER___________________
REM UMP.SYS can be used with HIMEM.SYS or alone. However, it cannot be used
REM with EMM386.EXE. UMP.SYS does not provided expanded memory, so if
REM expanded memory is required, use EMM386.EXE. By default, UMP.SYS claims
REM all available upper memory address ranges. If you are using PC Card
REM devices, you need to reserve address space for those devices.
REM To allow the BIOS to support SRAM cards in either drive A or B:
rem device=d:\ump.sys /X=C800
REM To allow NGENMOD.SYS to provide internal modem support:
rem device=d:\ump.sys /X=C800,CC00
REM To allow CardSoft to manage PC Card devices:
rem device=d:\ump.sys /X=D000,D400,D800,DC00
REM The exclude switches above are additive. Therefore, if both
REM NGENMOD.SYS and CardSoft are used:
rem device=d:\ump.sys /X=C800,CC00,D000,D400,D800,DC00
REM The following line allocates all upper memory provided to the DOS memory
REM manager for use by DEVICEHIGH and LOADHIGH.
rem dos=umb
REM ^^^^^^^^^^^^^^^^^^UPPER MEMORY PROVIDER^^^^^^^^^^^^^^^^^^
REM ___________________EXPANDED MEMORY MANAGER___________________
REM Load EMM386.EXE for expanded memory.
REM Notes: The address ranges used must be explicitly specified, since the
REM scanning algorithms used do not consistently find the available ranges.
REM HIMEM.SYS must be loaded before EMM386.EXE
REM Without CARDSOFT:
rem device=emm386.exe i=B000–B7FF x=C800–EFFF 1024 ram frame=E000
REM With CARDSOFT
rem device=emm386.exe i=B000–B7FF i=C800–CFFF x=D000–DFFF i=E000–EFFF 1024
ram frame=E000
REM The following line allocates all upper memory provided to the DOS memory
REM manager for use by DEVICEHIGH and LOADHIGH.
rem dos=umb
REM :^^^^^^^^^^^^^^^^^^EXPANDED MEMORY MANAGER^^^^^^^^^^^^^^^^^^
REM :______________ADVANCED POWER MANAGEMENT (APM) BIOS_____________
REM : Load the NORAND Advanced Power Management BIOS
device=d:\norapm.exe
REM ^^^^^^^^^^^^^^ADVANCED POWER MANAGEMENT (APM) BIOS^^^^^^^^^^^^^^
REM ___________DOS ADVANCED POWER MANAGEMENT (APM) DRIVER____________
REM Do not load this if running Windows applications!
REM /SS:1 is required whenever CARDSOFT drivers are loaded.
REM Please see the documentation for other settings that may be
REM applicable. Turn off devices not used: Ethernet, ports, etc.
REM Use this line for non-penpal and non-penright apps
rem device=d:\npower.exe /AC:FF,CF,FE /SS:1
REM Use this line for penpal and penright apps. It is not looking at VGA
REM output for indications of activity.
device=d:\npower.exe /AC:FF,CF,F6 /SS:1
REM ^^^^^^^^^^^DOS ADVANCED POWER MANAGEMENT (APM) DRIVER^^^^^^^^^^^
REM ___________________DOS BATTERY WARNING ICONS___________________
REM Do not load this if running Windows applications! This starts up the
REM battery warning icons in the lower left hand of the screen. Indicates
REM when connected to AC, when backup battery or main battery is low.
install=d:\batwarn.exe
REM ^^^^^^^^^^^^^^^^^^DOS BATTERY WARNING ICONS^^^^^^^^^^^^^^^^^^
A. Sample
Configuration Files
