APPENDIX A
Sample Configuration Files
A-16 PEN*KEY
R
6200/6300 Hand-Held Computer Programmer’s Reference Guide
;– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
[standard]
;– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
;––––––––––––––––––––––––––––––––––––
; This section for Enhanced mode
;––––––––––––––––––––––––––––––––––––
[386Enh]
display=*vddvga
keyboard=*vkd
mouse=*vmd
network=*vnetbios, *dosnet
device=vportd.386
device=vpwrd.386
device=vtdapi.386
device=*vpicd
device=*vtd
device=*reboot
device=*vdmad
device=*vsd
device=*v86mmgr
device=*pageswap
device=*dosmgr
device=*vmpoll
device=*wshell
device=*BLOCKDEV
device=*PAGEFILE
device=*vfd
device=*parity
device=*biosxlat
device=*vcd
device=*vmcpd
device=*combuff
device=*cdpscsi
local=CON
FileSysChange=off
;— COM3 is where the PCMCIA modem installs, if using one.
COM3Irq=10
COM3Base=03E8
;— The following fonts are required for Non-Windows application support.
; Optional.
;woafont=dosapp.fon
;EGA80WOA.FON=EGA80WOA.FON
;EGA40WOA.FON=EGA40WOA.FON
;CGA80WOA.FON=CGA80WOA.FON
;CGA40WOA.FON=CGA40WOA.FON
;— The following is required for Non-Windows application support
;[NonWindowsApp]
;CommandEnvSize=128
WIN.INI
The following is a typical WIN.INI example, for use with Windows 3.1, on a 6300
Computer:
;–––––––––––––––––––––––––––––––––––
; NORAND 6300 Windows 3.1 WIN.INI
;–––––––––––––––––––––––––––––––––––
[windows]
NorShellRun=winfile.exe
spooler=
load=
A. Sample
Configuration Files
