Intermec 6300 SERIES Programmer'S Reference Manual Download

Page: 91 / 410

SECTION 3

Supporting Windows Applications

PEN*KEY

6200/6300 Hand-Held Computer Programmer’s Reference Guide 3-5

The Table 3Ć3 files are required only in the Enhanced mode.

Table 3Ć3

Windows Enhanced Mode Files

Component

Description

SYSTEM\WIN386.EXE Virtual machine manager and default virtual device drivers.

Required

SYSTEM\VTDAPI.386 Virtual Timer Device API. Needed for Enhanced Mode multimedia.

Required

SYSTEM\VPWRD.386

Virtual Power Device. Needed for Enhanced Mode Power ManageĆ

ment.

Required

Table 3Ć4

Windows System Device Drivers

Component

Description

SYSTEM\COMM.DRV

Windows 3.1 serial port driver.

Required

SYSTEM\KEYBOARD.DRV Windows 3.1 keyboard driver.

Required

SYSTEM\SYSTEM.DRV

Windows 3.1 system driver.

Required

SYSTEM\YESMOUSE.DRV Windows 3.1 mouse driver that reports that a mouse is

available. NORPEN.DLL generates the actual mouse and pen

events.

Required

SYSTEM\PKROTATE.DRV PEN*KEY portrait VGA video driver.

Required

SYSTEM\MMSOUND.DRV Windows 3.1 sound driver.

Required

SYSTEM\SPEAKER.DRV

Windows 3.1 PC speaker multimedia driver.

Optional

SYSTEM\NOR4800.DRV

Windows 3.1 printer driver to support printing to NORAND

4800 Series Printers.

Optional

SYSTEM\NOR6805.DRV

Windows 3.1 printer driver to support IrDA printing.

Optional

SYSTEM\UNIDRV.DLL

Windows 3.1 universal printer driver; used by NOR4800.DRV

and NOR6905.DRV.

Required only if NOR4800.DRV or

NOR6805.DRV is used for printing.

Required

Table 3Ć5

Windows Installable Device Drivers

Component

Description

SYSTEM\NORAPM.DLL

PEN*KEY Advanced Power Management (APM) driver for

Windows. Provides interface to power management and system

control hardware. APM BIOS must be loaded (currently, this is

NORAPM.EXE).

Required

SYSTEM\NORPEN.DLL

PEN*KEY pen driver. Provides mouse input for Windows 3.1 and

pen input for Windows for Pen Computing 3.1, if used.

Required

SYSTEM\NORSCAN.DRV PEN*KEY scanner driver, provides bar code scanning support

under Windows 3.1.

Optional

SYSTEM\NORNPCP.DRV Provides NPCP printing support under Windows 3.1.

Optional

SYSTEM\NORIRDA.DRV Windows 3.1 driver to support IrDA printing. Required only if

IrDA printing is used.

Optional

3. Windows

Applications

Summary of Contents for 6300 SERIES



























































































































































































































































































































































































































Search results

Summary of Contents for 6300 SERIES

Reviews:

Related manuals for 6300 SERIES

Brands by name

Popular brands

Intermec 6300 SERIES, Programmer'S Reference Manual

Search results

Summary of Contents for 6300 SERIES

Reviews:

Related manuals for 6300 SERIES

Brands by name

Popular brands