Intermec 6300 SERIES Programmer'S Reference Manual Download

Page: 92 / 410

SECTION 3

Supporting Windows Applications

3-6 PEN*KEY

6200/6300 Hand-Held Computer Programmer’s Reference Guide

Table 3Ć6

VGA Device Fonts

Component

Description

SYSTEM\VGAFIX.FON

FixedĆpitch device font.

Required

SYSTEM\VGAOEM.FON OEM device font.

Required

SYSTEM\VGASYS.FON

Proportional device font.

Required

Table 3Ć7

Popular System DLLs

Component

Description

SYSTEM\COMMDLG.DLL Provides common dialogs, such as file open, file save, printing.

Optional

SYSTEM\LZEXPAND.DLL Functions for file expansion and copying.

Optional

SYSTEM\SHELL.DLL

Basic services common to Windows 3.1 shell programs, such as

File Manager.

Optional

SYSTEM\VER.DLL

Windows versioning API.

Optional

SYSTEM\WIN87EM.DLL

FloatingĆpoint emulator.

Optional

SYSTEM\MMSYSTEM.DLL Multimedia extensions.

Optional

SYSTEM\OLECLI.DLL

Object Linking and Embedding client.

Optional

SYSTEM\OLESVR.DLL

Object Linking and Embedding server.

Optional

SYSTEM\DDEML.DLL

Dynamic Data Exchange.

Optional

SYSTEM\TOOLHELP.DLL Debugging services.

Optional

Table 3Ć8

Sound Files

Component

Description

TADA.WAV

Sample multimedia sounds.

Optional

CHIMES.WAV Sample multimedia sounds.

Optional

Table 3Ć9

Utilities

Component

Description

PENALIGN.EXE Pen calibration application (Windows)

Optional

3. Windows

Applications

Summary of Contents for 6300 SERIES



























































































































































































































































































































































































































Search results

Summary of Contents for 6300 SERIES

Reviews:

Related manuals for 6300 SERIES

Brands by name

Popular brands

Intermec 6300 SERIES, Programmer'S Reference Manual

Search results

Summary of Contents for 6300 SERIES

Reviews:

Related manuals for 6300 SERIES

Brands by name

Popular brands