SECTION 10
Host Application Program
10-2 6950 Enterprise Gateway Server User’s Guide
NORAND Native is a simple command language for
controlling wireless stations from a host application.
Native Sockets let a host computer running a Native
application communicate to Native wireless stations
through the 6950 EGS via a TCP/IP socket connection.
Native Sockets support is included in the 6950 EGS version
6.04 and greater. The remainder of this section explains
Native Sockets programming.
Native Sockets Overview
Supported Products
The 6950 EGS supports Native Sockets applications for
1100, 1700, 5055, 5900, 6400, and 6550 terminals, using
INTERMEC
R
2100 UAPs or 6710 Access Points. It
supports synthesized UHF, 2.4 GHz OpenAir, and 900 MHz
radio technologies.
The 6950 EGS does not support Native Sockets for crystal
UHF and 900 MHz SST systems that use RC4000 Series
Base Stations or RC3250 Network Controllers.
Communication Basics
You can write Native Sockets programs for any host PC or
workstation supporting Ethernet and TCP/IP. Initiate
communication between the host and the 6950 EGS by
configuring both with a common port number (see
Configuration" later in this section). The 6950 EGS uses
this designated TCP port number to communicate with the
host.
Summary of Contents for 6950
