Uninterruptible Power Supply Instructions
11
Remote Sense Input Wiring Diagram
Note:
New cables may not adhere t the Intermec
current wiring scheme. Verify individual wire colors
and their equivalent connection before proceeding
with the UPS installation.
Note:
The toggle switch for remote sense operation is
not Intermec supplied. We recommend an SPST
switch (single pole single throw) rated at 24 VDC at 1
mA or less for the remote sense option.
Note:
Use a sealed switch for high humidity and dusty
environments. Follow customary electrical wiring
practices when wiring the switch.
Note:
Remove the dust cover from the circular
connector before installing the cable.
Cut this end if using
power supply 851-070-003
J1
X
J1
J2
1
1
-DC
Pin 2
Pin 1
Pin 4
Pin 3
Pin 1
Pin 2
-DC
-DC
+DC
+DC
+DC
Green
White
Red
Black
2
2
3
4
J2
Cut this end if using
power supply 851-041-003