Uninterruptible Power Supply Instructions
15
Typical UPS Installation Configuration
Maintaining Your UPS
This section provides useful tips on the operation and care of
your UPS (P/N 851-059-002 and P/N 851-059-003). There are
a number of industrial material handling units in existence. This
section refers to the equipment that the UPS is installed on as a
lift truck.
Storing the UPS
UPS units have an internal lead acid battery. These batteries have
characteristics that are well suited for demanding environments.
However, like all energy storage devices, they have limitations.
By taking reasonable care of the battery, its performance can be
optimized. However, failure to properly care for the battery can
result in a much shortened life span. If at all possible, the UPS
should be stored at temperatures less than 24°C (75 °F).
Optimally, it should be fully charged at the beginning of any
length of storage period of several weeks or more. The following
recommendations add to the life of the battery.
Cable (P/
N
226-340-003)
DC-DC
converter
DC-DC
converter
Battery
Ferrite
bead
Heater
power
CV60
power
VEO12-8017
Cable (P/
N
226-341-005/006)
Cable (P/
N
226-340-003)
UPS
Cable shield
wire tied to
mounting
plate for DC-DC
converter
Serial cable
(P/
N
321-593-002)
Remote switch cable
(P/
N
226-340-003)
Ferrite bead
Ferrite bead
