75
Intermec EasyCoder 601 XP – Installation & Operation Ed. 3
Chapter 9 Intermec Shell Startup Program
Terminal Setup,
cont'd.
Changing the Setup
If you want to set up the printer or use any other of the facilities,
you should answer N (=No) to the “Select Application” prompt.
The following example illustrates how to enter the Setup Mode:
----------------
SHELL
SEL. APPLICATION
----------------
(Y / N / B):N
----------------
SHELL
SETUP
----------------
(Y / N / B):Y
----------------
SETUP:
SER-COM,UART1
From here you can navigate through the Setup Mode by means of
keys on a VT100 terminal according to the same principles as when
using the printer's own keyboard (see overviews in chapter 8):
Key
Action
u
Move one menu to the left on the same level (same
as <F1>).
d
Move one menu to the right on the same level (same
as <F2>).
e
Display error message at test label printing failure
(same as <F3>).
b
Move up one level or scroll back in a stack of menus
(same as <F4>).
f
Move down one level or scroll forward in a stack of
options (same as <F5>).
x
Exit the setup (same as <Setup>).
0 – 9
Enter numeric values.
.
Specify negative values (same as < . >).
Enter
Acknowledge and move to next menu, perform
testfeeds, or print test labels (same as <Enter>).
Backspace
Delete one character to the left of the cursor (same
as <C>).
