manualshive.com logo in svg

Intermec EasyCoder PC4, Programmer'S Reference Manual

The Intermec EasyCoder PC4 is a versatile thermal transfer printer perfect for small businesses. Enhance your printing experience with the Programmer's Reference Manual, available for free download on our website. This comprehensive manual will guide you through setup and maintenance to ensure optimal performance for your PC4.

Share
Download
background image

Contents

ESim for the PC4 and PF8 Printers Programmer’s Reference Manual

vii

eR - User-Defined Error/Status Character Control . . . . . . . . . . . . . . . . . . . . . . . . . . 72
f - Cut Position  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
FE - End Store Command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
FI - Print Form Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
FK - Delete Form. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 76
FR - Retrieve Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
FS - Form Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Startup Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

GG - Print Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
GI - Print Graphics Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
GK - Delete Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
GM - Store Graphics In Memory  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
GRP - Reply Graphics From Print Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
GW - Store Graphics In Image Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
I - Character Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
i - Asian Character Spacing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
JB - Disable Top of Form Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
JF - Enable Top of Form Backup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
j - Media Feed Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
LE - Line Draw Exclusive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
LO - Line Draw Black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LS - Line Draw Diagonal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
LW - Line Draw White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Memory - Memory Allocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
N - Clear Image Buffer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
O - Option Select  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 95

S - Reverse Gap Sensing Enabled  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
N - Label Taken Sensor Disable  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
D - Ribbon End Sensor Disable  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
C - Cutter Enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

oR - Character Substitution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
P - Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
PA - Print Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
PF - Feed Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Q - Set Form Length (Gap or Slot) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Continuous Stock  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Q - Set Form Length (Black Mark) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
q - Set Label Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
R - Set Reference Point  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
r - Set Relative Reference Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
S - Speed Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
SA - Setup Adjust  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
SPC - Setup Print Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
TD - Define Date Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
TS- Set Real-Time Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
U- Print Configuration (General) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
UC - Command Reply Accept Character Control. . . . . . . . . . . . . . . . . . . . . . . . . . .116

Summary of Contents for EasyCoder PC4





















































































































































































Reviews:

No comments

Related manuals for EasyCoder PC4

Dicota Dicota ComfortCase N17898NHY Specifications preview
Dicota ComfortCase N17898NHY
Brand: Dicota Pages: 1
Bugaboo Comfort transport bag Manual preview
Comfort transport bag
Brand: Bugaboo Pages: 18
BAGTAG Belt Manual preview
Belt
Brand: BAGTAG Pages: 4
Listen Technologies Listen Soft Case LA-306 Product Manual preview
Listen Soft Case LA-306
Brand: Listen Technologies Pages: 1
Listen Technologies LA-322 Parts Manual preview
LA-322
Brand: Listen Technologies Pages: 1
Listen Technologies LA-313 Owner'S Manual preview
LA-313
Brand: Listen Technologies Pages: 1
Listen Technologies LBB 4500 Specifications preview
LBB 4500
Brand: Listen Technologies Pages: 2
Listen Technologies LA-311 User Manual preview
LA-311
Brand: Listen Technologies Pages: 36
Easylife Sat Nav Pack Manual preview
Sat Nav Pack
Brand: Easylife Pages: 2

Brands by name

Popular brands

Load more brands