InterMotive Inc.
13395 New Airport Rd.
Auburn, CA 95602
Phone: (530)-823-1048
Fax: (530)-823-1516
Page 10 of 13
www.intermotive.net
products@intermotive.net
PRPC501-A-090314-INS
Initial Installation Power-Up:
The following sequence must be performed prior to mounting the PRPC501-A module. The
initial installation is completed as follows:
1. Ensure the Data Link harness 6 pin connector is NOT connected
to the PRPC501 module.
2. Turn the vehicle key on, engine off
3. Insert the Data Link harness 6 pin connector into the PRPC501
module.
4. The PRPC’s red fuse LEDs will “scroll” if the VIN is not
recognized.
Reconnect the vehicle battery
PRPC501-A Module Mounting
Ensure all the harnesses are properly connected and routed. Mount the PRPC501 module as
described on page one. Verify the module is in an area away from any external heat sources
(engine heat, heater ducts, etc.), and secure using screws or double sided tape.
