IRDC38063-P1V2
16
Click the command
in right panel.
Enable / Disable Channel
(Command: OPERATION)
Change Vout
(Command: VOUT_COMMAND)
1.
Enter Vout voltage.
2.
Press enter after entering value.
3.
Click “Write” button to send the command.
1.
Ensure the channel enable is set high on
board.
2.
Click “On” or “Immediate Off” to turn on or
off the channel.
3.
Click “Write” button to send the command.
PMBus Command Screen
*
*
Select command
from pull down List
Select Command for Selected Channel
or
*
Click to sort the PMBus commands by name
Click to sort PMBus commands by operation code
View Basic or All PMBus Commands
Quick Start: PowIRCenter GUI
PMBus Commands
