manualshive.com logo in svg

International Trucks ProStar+ Eagle Series., Operator'S Manual

The International Trucks ProStar+ Eagle Series Operator's Manual is an essential resource for truck operators, offering a comprehensive guide to using the product effectively and safely. Download this invaluable manual for free from our website 88.208.23.73:8080 today and enhance your knowledge of this advanced trucking solution.

Share
Download
background image

Index

O

(CONT.)

Operating Instructions (cont.)

Ultra Low Sulfur Diesel Fuel Requirements. . . . . . . . . . . . . .137
Unacceptable Fuel Blends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

Rear Axles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

Driver Controlled Differential Lock. . . . . . . . . . . . . . . . . . . . . . . . .150
Locking or Limited Slip Differentials. . . . . . . . . . . . . . . . . . . . . . .148
Tandem Axle Power Divider Lock (PDL) Control. . . . . . . . .149

Rear Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

Air Suspension System Faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Rear Air Ride Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Rear Air Suspension Air Dump. . . . . . . . . . . . . . . . . . . . . . . . . . . .150

Steering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

Adjustable Steering Column. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

Transmission. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Clutch Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Clutch Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
Double Clutch Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
Eaton AutoShift® Transmissions (Optional). . . . . . . . . . . . . .146
Eaton UltraShift® Transmissions (Optional). . . . . . . . . . . . . .148
Engaging the Clutch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
Hydraulic Clutch Actuation System. . . . . . . . . . . . . . . . . . . . . . . .144
Manual Transmissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
Power Take-off Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Operation Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

Cab Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

Optional Diamond Logic® Electronic Application Solutions. . . . .8
Optional Instrument panel gauge cluster Compass Calibration

Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Compass Declination Zone Set Procedure. . . . . . . . . . . . . . . . . . .57
Compass Directional Calibration Procedure. . . . . . . . . . . . . . . . . .60

O

(CONT.)

Outside Temperature and Compass Displays (Optional). . . . . .74
Outside Temperature Reading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Overhead Console. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

P

Panel Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Park Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Parked Regeneration Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Parking Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

Parking Brake Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Parking Brake Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

Parking Brake Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Parking Brake Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Parking Brake Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Pedal Free Travel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Power Inverter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Power Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Power Receptacle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Power Sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Power Steering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199
Power Steering Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
Power Take-off Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Premium Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
ProStar

®

+ Series Light Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . .231

Purge Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

Q

Quadrant 1: Informational Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Quadrant 2: Text and Warning Messages. . . . . . . . . . . . . . . . . . . . . . .67

244

3878859R2

Summary of Contents for ProStar+ Eagle Series.








































































































































































































































































Reviews:

No comments

Related manuals for ProStar+ Eagle Series.

SANO UNIKAR Instruction Manual preview
UNIKAR
Brand: SANO Pages: 8
VonHaus 15/167 User Manual preview
15/167
Brand: VonHaus Pages: 2
Paccar DAF CF Driver Manual preview
DAF CF
Brand: Paccar Pages: 375
Airaid 400-602 Installation Instructions preview
400-602
Brand: Airaid Pages: 2
HARBEN 4018 Operation & Maintenance Manual preview
4018
Brand: HARBEN Pages: 49

Brands by name

Popular brands

Load more brands