Inspection Guide
Right Engine Compartment
WARNING
To
prevent
personal
injury
or
death
from
hot coolant or steam, use only the following
procedure to remove the pressure cap from the
radiator or expansion tank. Allow the engine to
cool first. Wrap a thick, heavy cloth around the
cap. Unscrew the cap slowly to allow pressure
to release from under the cap. After the pressure
has been released, the pressure cap may be
removed.
1.
Coolant Level: Do not remove pressure cap unless
coolant is cool.
Ensure fluid level is between the
minimum and maximum fluid level range as marked on
the plastic translucent reservoir.
2.
Radiator and Charge Air Cooler:
Check for loose
mounting and damage. Inspect condition of all hoses
for damage, cracks, and leaks.
Inspect for foreign
material on face of cooling package. Carefully brush
away collected materials without bending cooling fins to
maintain proper airflow through cooling package.
3.
Windshield Washer Fluid Level: Inspect the reservoir
and verify that the fluid level is not empty and has
enough fluid to accomplish the upcoming mission. If
additional fluid is required, see Lubricant and Sealer
Specifications chart, in the Maintenance Intervals and
Specifications section, for the correct fluid type before
filling. Do not use water in freezing climates.
4.
Drive Belts: Inspect all belts for frays, cracks, loose
fibers, or visible signs of wear. With engine off, press
on all belts to test for proper belt tensioner performance
5.
Cowl Vent: Ensure air inlet cover is free of dirt and
debris.
•
Air Lines and Wiring: Check air Lines and electrical wiring
for proper security, damage, and chafing. Listen for audible
air leaks.
32
3878859R2
Summary of Contents for ProStar+ Eagle Series.
