manualshive.com logo in svg

International Trucks ProStar+ Eagle Series., Operator'S Manual

The International Trucks ProStar+ Eagle Series Operator's Manual is an essential resource for truck operators, offering a comprehensive guide to using the product effectively and safely. Download this invaluable manual for free from our website 88.208.23.73:8080 today and enhance your knowledge of this advanced trucking solution.

Share
Download
background image

Table of Contents

Rear Air Suspension Air Dump. . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Air Suspension System Faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151

Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Downhill Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Air Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Air Gauge, Low Air Pressure Beeper and Warning
Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
Reservoir Moisture Draining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
Brake Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
Parking Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
Parking Brake Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Parking Brake Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Air Dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Trailer Brake Hand Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Trailer Air Supply and Parking Brake Modular Controls. . .156
Parking Brake Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Bobtail Proportioning System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Antilock Brake System (ABS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
ABS Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
ABS Self Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Antilock Driving Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

Automatic Traction Control (ATC) System . . . . . . . . . . . . . . . . . . . . .159

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
ATC System Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
ATC OFF ROAD or MUD/SNOW Switch. . . . . . . . . . . . . . . . . .160
Stability Control Systems – Bendix® RSP/WABCO
RSC/Bendix ESP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

Towing Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162

Tow Hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

Towing Vehicle With Front Wheels Suspended. . . . . . . . . . .164
Towing Vehicles With Driver Controlled Differential
Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
Removing Axle Shafts Before Towing. . . . . . . . . . . . . . . . . . . . .164
Installing Axle Shafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
Towing Vehicle With Rear Wheels Suspended. . . . . . . . . . .165

Tractor-Trailer Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

Connecting/Disconnecting a Trailer to a Vehicle with
Air Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
Fifth Wheel Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
Fifth Wheel Slide Switch (Optional). . . . . . . . . . . . . . . . . . . . . . . .167
Hook-Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
Un-Hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
Fifth Wheel Jaw Unlock Control . . . . . . . . . . . . . . . . . . . . . . . . . . .168
Fifth Wheel Jaw Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

Section 7 – Maintenance Instructions

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
Supporting Your Vehicle for Service. . . . . . . . . . . . . . . . . . . . . . . . . . . .173
Chassis Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
Air Conditioning Service Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174

HVAC Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Side Access HVAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Front Access HVAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
Recirculation Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
Sleeper HVAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

Axles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

Front Axle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
Inspection and Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
Normal Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

3878859R2

v

Summary of Contents for ProStar+ Eagle Series.








































































































































































































































































Reviews:

No comments

Related manuals for ProStar+ Eagle Series.

U-Line H-4124 Assembly Instructions Manual preview
H-4124
Brand: U-Line Pages: 6
Franklin 70027 Owner'S Manual & Safety Instructions preview
70027
Brand: Franklin Pages: 8
Jet JTX-2748 Operating Instructions And Parts Manual preview
JTX-2748
Brand: Jet Pages: 16
Columbus McKinnon PROLINE MOTION HU 26-115 TMt Translated Operating Instructions preview
PROLINE MOTION HU 26-115 TMt
Brand: Columbus McKinnon Pages: 16

Brands by name

Popular brands

Load more brands