7
Login & Manual Set up
Your modem’s WiFi has been pre-configured. You’ll find the WiFi
network name (SSID) and password (Wireless Key) printed on a
sticker on the back of your modem.
1.
On a computer or WiFi device that’s connected to your
modem, open your web browser and go to
http://10.1.1.1
2.
Log in with the default username and password, which can
be found under “GUI Login” on the sticker on the base of
your modem.
3.
The Setup Wizard should open. If it doesn’t, select
Setup
Wizard
.
4.
Set
WAN Interfaces
to “Ethernet” with
WAN Type
“PPP
over Ethernet”.
VLAN Enabled
should be turned ON with
VLAN ID
set to “2”.
5.
Enter your credentials as provided in the email advising that
your NBN™ service is active.
Username:
Your broadband username
(include “@internode.on.net”)
Password:
Your broadband password
Password Recovery:
internode.on.net/getmypassword
6.
Click
Next
. After connecting successfully, you may wish to
customize your WiFi network and/or GUI Login details by
following the steps on the next page of this guide.
7.
If following these manual setup instructions doesn’t get
you online, please use the details on the back cover of this
guide to call our Support Team for assistance.
TG789vac v2
Wireless VoIP Smart Ultra Broadband Gateway
Wireless user codes
2.4GHz Network name:
5GHz Network name:
Wireless Key:
internodeD1234F
internodeD1234F - 5G
3X4mple123
GUI Login: http://10.1.1.1
Username: admin
Password: test01234
