17
User Manual
2
. Getting Started
This chapter provides basic information to get you started using the chart plotter;
it will help you in becoming familiar with the chart display and the functions of the
controls before you start using the chart plotter.
2.1
SWITCHING ON/OFF
Before powering On the chart plotter, check for the correct voltage (10-35 volt
dc) and the correct connections with the positioning instrument.
Switching On
[PWR] for 1 second
The chart plotter shows you the logo screen, Caution Notice and then the chart
screen in sequence. The chart plotter will then perform a short self test procedure
that checks all internal memory and the C-CARD (if installed), and then displays
any failure detected on the screen.
Switching Off
[PWR] for 3 seconds
A countdown timer appears on the screen, if you release the key before the
countdown timer reaches zero, the chart plotter will remain On.
2.2
CHANGING BACKLIGHT AND CONTRAST
You can change the level of backlight and contrast for the screen.
[PWR] + move the cursor left/right to adjust backlight levels and/or move
the cursor up/down to adjust contrast [C
ONFIRM
]
Now you return to the chart screen with the new backlight and contrast levels retained.
2.3
SELECTING THE LANGUAGE
It is possible to select the language in which you wish information to be displayed (for
screen labels, menus and options, but it does not affect the map information).
[MENU] + "SETUP" + [ENTER'] + "Language" + [ENTER] + select the lan-
guage you want + [ENTER]
2.4
USING C-MAP C-CARDS
The chart plotter has a built-in world map that can be used for Route planning. To
use the chart plotter as a navigation aid, charts with detailed information for the
area you wish to navigate are required. This chart cartridge is called C-CARD.
NOTE
During normal operations the C-CARD should not be removed since the chart
plotter may lock up.
2.5
SIMULATION MODE
The built-in Simulator function allows you to become proficient in the use of the
chart plotter. It simulates the reception of the navigation data (Lat/Lon, Course,
Summary of Contents for Chart Master 169CSI
