37
User Manual
4
. User Setting Up
4.1
MENU
To set up the map layout:
[MENU] + "MENU" + [ENTER]
Map Orientation
From the Chart page, [MENU] + "MENU" + [ENTER] + "MAP ORIENTATION"
+ [ENTER]
The possible choices are listed in the table below:
North Up
: The map is shown with North upwards
Track Up
: The map is shown with the ship's current heading upwards
Palette
FOR
COLOR
CHART
PLOTTER
[MENU] + "MENU" + [ENTER] + "PALETTE" + [ENTER]
It is possible to set the palette used to enhance the visibility of the screen de-
pending on the surrounding light condition. The possible choices are listed in the
table below:
Normal
: It is recommended when the chartplotter is not exposed to the direct sunlight.
When this mode is set the maps are displayed in order to use colors as similar
as possible to the ones used in the original paper charts.
Night
: It is recommended when the environment is dark in order to reduce the glare
of the display. The chartplotter displays maps and screen in darker colors.
Sunlight
: It is designed to enhance the visibility of the screen when the chartplotter is
exposed to the sunlight. The maps are much brighter than in the other modes
and the depth areas are filled with white color so different depth areas are not
easily distinguishable.
NOAA
: Allows setting NOAA paper chart colors presentation.
Zoom Type
From the Chart page, [MENU] + "MENU" + [ENTER] + "ZOOM TYPE" +
[ENTER]
Allows more expansions or compression of the chart scale while zooming in or out.
Zoom Mode has two options; STANDARD (default) or FLEXI-ZOOM. When in FLEXI-
ZOOM mode, a short
[ZOOM...]
push causes a change of chart, whilst a long
[ZOOM...]
push (press and hold) causes a pop-up window to be displayed on a
corner of the screen. The window shows the current Zoom Factor. By pressing
[ZOOM
IN]
/
[ZOOM OUT]
the map is expanded or compressed according to the zoom factor
selected. The Window is automatically closed if
[ZOOM...]
is not pressed for 2 sec-
onds and the selected zoom factor will be used at the next zoom in/out.
Font & Symbols
From the Chart page, [MENU] + "MENU" + [ENTER] + "FONT & SYMBOLS"
+ [ENTER]
On MAX charts it is possible to set the size of all names and symbols drawn on the
charts, selecting between Normal size (the regular characters size) and Large
size.
Summary of Contents for Chart Master 169CSI
