58
User Manual
Serial Ports
Change parameters:
Changes the parameters of the serial interface. This menu
allows to select the
Port
(Signal Source), the
Baud Rate
between 4800 or 9600,
the
Data Bits
(Word Length) between 7 or 8, the
Parity
between even, odd or
none, the
Stop Bits
between 1 or 2.
Input Data Display:
Allows the chart plotter to act as a computer terminal and
display the incoming data exactly as it is received. If the data displayed on the
screen is unrecognizable, you may have selected the wrong input parameters for
your particular receiver. Check your receiver manual to be sure that you have
selected the proper interface format. If the screen is blank, you may have a
broken connection, and no data is being received.
Modem test
Checks the Modem connections. Press [ENTER] to select the desired Port related
to the connections made, to the Port to which the Modem C-COM is connected.
Summary of Contents for Chart Master 169CSI
