33
Plot (Track Plot) View
If your separate Loran C, Decca or GPS receiver has the
proper NMEA #0183 output capability, or if you own the
Interphase Star Pilot GPS
,
Pilot GPS
or
Interphase
Pilot Loran
, you can easily interface the unit to the
Twinscope
to show both digital and graphic navigation
information. Possible information obtained from a
navigation receiver can include track plotting and digital
Lat/Lon readings. The
Twinscope
can also mark
positions with several different graphic symbols. These
functions will not work unless you are able to
successfully interface a navigational instrument such as a
Loran C, Decca or GPS receiver to the
Twinscope
. (see
page 66)
From the
Command Center
select the "
Plot View
" and
press the "
GO
" soft key to bring up the menu showing the
features and adjustments for this view.
Range
The "
RANGE
" soft key calls up the sub-menu which lets
you turn on and off an automatic plot ranging function by
pressing the soft key labeled "
TRACK
". This feature
will, for example, automatically increase the track plot
range if your position goes off the screen. You can
manually adjust the plotter range by using the "
RANGE
"
up/down soft keys in this sub-menu.
The Track Plot square on the display shows the current
plotter range (1/4, 1/2, 1, 2, 4, 8, 16, 32, 64, 128) in
statute (U.S.) or nautical miles, depending on the units of
measure selected.
Mark
Pressing the "
MARK
" soft key allows you to mark your
current position on the track plot screen with one of three
graphic icons - an anchor, a fish or a flag. Each icon can
be used up to ten times on a track plot for a total of 30
possible marks. When power is removed from the
Twinscope
, the marks are erased.
Summary of Contents for Color Twinscope
