Chapter 6: Setting Up RAS Support Properties
iSPAN PRI PCI ISDN Users Guide
65
The following table describes the parameters in the 5535 RAS
Support dialog fields:
Parameter
Function
Adapter
Identifies the status and the network name of the adapter.
The LED beside the adapter name represents the adapter
status. Green means that the driver is running, and gray
means that it is not running.
The numeric suffix in the name (in this case,
3
) is the logical
network adapter number assigned by Windows NT.
Idle Timeout
The Idle timer is an inactivity timer. It is used to disconnect
an ISDN connection when no data traffic is exchanged.
This timer setting is attached to the displayed adapter. The
setting is identical for all of the adapter’s ISDN B channels.
To disable the Idle Timeout, enter
0
.
Card
Displays the name of the physical 5535 adapter.
Summary of Contents for iSPAN 5535 PRI
