16
7 - HOW TO USE CHEMICAL PRODUCTS
8 - USE OF ROTOTEK OR MULTIREG 99
Pressure selection
must be carried out with closed gun
(1)
A - selection of the pr essure
• High pressure (2)
• Low pressure (3)
B - selection of the jet
• straight pin jet (4)
• fan jet (5)
The TX 300 and TX 500 series high pressure cleaners have been constructed to permit the suc-
tion and mixing of detergents and other liquids from the internal tank.
7.1 -
CHEMICAL SUCTION
Fill as shown in fig.1. Select low pr essure mode on Multir eg or Rototek nozzle (Fig. 2). Adjust
the desired quantity of detergent by turning the knob (Fig. 3).
To drain the tank, unscrew the cap on the bottom of the machine (Fig. 4).
After use, rinse the chemical suction cir cuit with plain water.
Capacity of built-in tank: TX300 18 liters – TX500 25 liters.
0
I
OFF
2
1
3
H
L
H
L
4
5
H
L
H
L
A
B
fig.1
fig.2
fig.3
fig.4
In the event of direct contact with detergent additives, follow instructions provided by the man-
ufacturer and/or product retailer and rinse the af fected body part with clean water.
