background image

124

KONFORMITÄTSERKLÄRUNG 

(gemäß Anhang II der Europäischen Richtlinie 2006/42/EG)

Der Hersteller 

INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 - 42049 S. ILARIO D'ENZA (RE) - Italien

ERKLÄRT auf alleinige Verantwortung, dass die wie folgt bezeichnete und beschriebene Maschine:
Maschinentyp: Tragbarer Hochdruckreiniger (elektronische und elektromechanische Haushaltsgeräte)
Herstellermarke: INTERPUMP GROUP
Modell: 

TX 300 - TX 500

mit den nachstehend aufgelisteten Richtlinien und ihren nachfolgenden Aktualisierungen konform ist:
- Maschinenrichtlinie 2006/42/EG
- Niederspannungsrichtlinie 2006/95/EG
- Richtlinie 2004/108/EG über die elektromagnetische Verträglichkeit
- Richtlinie zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten 2011/65/EU - RoHS

Das Gerät enthält keine Stoffe, für die Beschränkungen bezüglich ihrer Verwendung in Konzentrationen bestehen, die über denen im 
Anhang II liegen, mit Ausnahme von Anwendungen, die von den im Anhang II aufgeführten Beschränkungen ausgenommen sind.

- Richtlinie 2012/19/EU über Elektro- und Elektronikaltgeräte
- Richtlinie 2000/14/EG über umweltbelastende Geräuschemissionen

Bewertung der Konformität nach Anhang V
Schallleistung: Lw= 88 dB(A) - Garantierte Schallleistung: Lw= 92 dB(A)

Der Hersteller garantiert mittels unternehmensinterner Maßnahmen, dass alle produzierten Maschinen mit der vorliegenden Erklärung
konform sind.

Angewandte Normen:

• EN 60335-1  • EN 60335-2-79  • EN 55014-1/2  • EN 61000-3-2/3/11  • EN 62233  • EN 50581

Person, die bevollmächtigt ist, die relevanten technischen
Unterlagen zusammenzustellen:

Maurizio Novelli
Adresse: INTERPUMP GROUP S.p.A.
Via E. Fermi, 25 - 42049 S. ILARIO D'ENZA (RE) - Italien

Person, die zur Ausstellung dieser Erklärung bevollmächtigt ist:

Der Geschäftsführer Ing. Paolo Marinsek

                                                               

Reggio Emilia Mai 2014

Unterschrift ___________________________________

DECLARACIÓN DE CONFORMIDAD 

(De acuerdo con el anexo II de la Directiva Europea 2006/42/CE)

El fabricante 

INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 - 42049 S. ILARIO D'ENZA (RE) - Italia

DECLARA bajo su propia y exclusiva responsabilidad a la máquina identificada y descrita del siguiente modo:
Tipo de máquina: hidro-limpiadora móvil de alta presión (categoría AEE electrodoméstico)
Marca del fabricante: INTERPUMP GROUP
Modelo: 

TX 300 - TX 500

Resulta ser conforme con las directivas que se indican a continuación y con sus sucesivas actualizaciones:
- Directiva de Máquinas 2006/42/CE
- Directiva sobre la baja tensión 2006/95/CE
- Directiva sobre la compatibilidad electromagnética 2004/108/CE
- Directiva acerca de la restricción del uso de determinadas sustancias peligrosas en máquinas eléctricas y electrónicas 2011/65/UE - RoHS

La máquina no contiene sustancias con restricción de uso en concentración mayor de aquellas citadas en el anexo II, exceptuando las 
aplicaciones exentes de las restricciones citadas en el anexo III.

- Directiva sobre los residuos de aparatos eléctricos y electrónicos 2012/19/UE
- Directiva sobre emisiones acústicas ambientales 2000/14/CE

Valoración de la conformidad contenida en el anexo V
Potencia sonora: Lw= 88 dB(A) - Potencia sonora garantizada: Lw= 92 dB(A)

El fabricante, a través de medidas tomadas por la empresa, garantiza que todas las máquinas fabricadas cumplen con todo lo declarado
con anterioridad.

Normas aplicadas:

• EN 60335-1  • EN 60335-2-79  • EN 55014-1/2  • EN 61000-3-2/3/11  • EN 62233  • EN 50581

Persona autorizada a realizar el fascículo técnico

nombre: Maurizio Novelli
Dirección: INTERPUMP GROUP S.p.A.
Via E. Fermi, 25 - 42049 S. ILARIO D'ENZA (RE) - Italia

Persona autorizada a redactar la declaración:

El administrador delegado Ing. Paolo Marinsek

                                                               

Reggio Emilia  Mayo de 2014

Firma _______________________________________

Summary of Contents for TX 300 10-130.2



























Reviews: