2.
The weight can be locked with the attached locking clip. This will prevent
the weight to be removed by only pulling the handle.
The clip is fastened to the handle with a wire and then the clip is pushed
into the release slide to lock the weight. To remove the weight, the locking
clip first has to be pulled out.
Assembling and removing the BC
It is possible to dive with or without the BC attached to the harness.
Assemble the BC
1.
Assemble the BC on the two knobs on the backplate of the harness.
2.
First insert one of the knobs and then bend the BC a little until it is possible
to insert the other knob.
Divator Pro BC / harness
15
ENGLISH