4
INSPIRE FACE MASK & BREATHING
VALVE
USER MANUAL
The INSPIRE mask is a Class 3 full face mask approved for use with Interspiro
breathing apparatus. The equipment is type tested and EC type examined (Directive
89/686/EEC) by DEKRA EXAM, Dinnendahlstrasse 9, D-44809 Bochum. Produced
under supervision, Article 11B, by SGS United Kingdom Ltd., Weston-super-Mare,
BS22 6WA, UK. (Notified Body 0120).
1 SAFETY NOTICE
The product must only be used with an approved Interspiro breathing apparatus:
INCURVE/SpiroGuide/SpiroGuide II, QS/QS II or 90U system.
Only use breathing air according to EN 12021.
If the face mask and/or the self contained breathing apparatus is to be used in
conjunction with other personal protective equipment it is important to ensure that the
additional personal protective equipment is compatible with the face mask and does
not impair the full protection of the respiratory protective device.
Examples of dangers which may require the use of additional personal protective equipment:
-Liquids, steam or gases which can damage the skin.
-Pollutants absorptive by skin
-Thermal radiation
-Mechanical effects
-Explosive environments
-Oxygen-enriched breathing air.
The product must only be used by personnel in good health and trained in the use of
respiratory protective equipment. Individuals with beards or large sideburns may not
obtain an adequate seal. The face mask must be maintained, serviced and tested as
described in this user manual, Interspiro service manuals and Interspiro test instructions.
INTERSPIRO IS NOT RESPONSIBLE FOR
COMBINATIONS OF PRODUCTS, UNLESS PUT TO MARKET BY INTERSPIRO
CHANGES OR ADAPTATIONS MADE TO THE PRODUCT BY A THIRD PARTY
