5.
Pull on the webbing so that the velcro protector lies flat against the back
part of the BCD. Tuck back the plastic reinforced part over some molle
bands, in under the velcro protector. Do the same for the other side.
Open the velcro flaps on the ballistic plate pocket.
6.
Carefully position the velcro, on the ballistic plate pocket, over the
corresponding velcro on the velcro protector.
Now the ballistic plate pocket should be held firmly in place.
Velcro protector without ballistic plate
If not using the ballistic plate pockets the velcro protector is meant to be put
over the cummerbund to protect and “cover” the velcro material when using the
BCD.
Comfort pad (optional)
Use the molle bands on the back of the comfort pad to fasten it to the back of
the ballistic plate pocket.
OX10 MOLLE BC
13