Jump Starter Pack Device Operation Instructions
ACR/QA 1829Nov
Section-A) General Information Continued:
5)
Tools (Recommended):
a)
Battery Terminal Cleaning Tool, Brush or Sand Paper,
b)
Size Appropriate Wrench and/or Socket - (Corresponding Extension and Ratchet),
c)
Baking Soda or Battery Acid Cleaner (Spray),
d)
Hand Cleaner, Moist Towelettes, Shop Towels and/or Rags.
Section-B) Jump Starter Pack Device Use:
Precaution: To insure the proper jump-starting of the vehicle, make certain
that the jump-starter device is fully charged before using.
Step #1) Before using your the jump starter pack device, TO ACTIVATE; PRESS & RELEASE THE POWER BUTTON
THAT IS LOCATED ON THE SIDE OF THE JUMP STARTER PACK DEVICE. Once activated, Confirm the
indicator levels before using. Determine the power indicator level by either the (Number of Bars, or
Dots); indicating the remaining charge status of the jump starter pack device. If the power bar levels
are low, recharge the jump starter pack device to a full charge before use.
Jump Starter
Pack Device
Indicator
Level Light
