18
19
7.4.4 Remove receiver wire with dome
1. Hold the receiver wire with your thumb and forefinger and remove the receiver wire.
7.4.5 Sports lock
Your hearing care professional will apply and adjust the Sports lock.
7.5 Operation of the hearing aid
7.5.1 Push button or Multi-function button
Your hearing aid is equipped with a push button (61 models) or a multi-function button (62 models)
allowing you to use up to four different listening programmes, each of them suitable for certain situa-
tions.
1. Tap the push button or multi-function button to switch between programmes.
2. You will then hear one or more beeps. The number of beeps indicates which programme you
have selected (one beep = programme one, two beeps = programme two, etc.).
3. When you turn the hearing aids off and then back on, they always return to the default setting
(programme one and preset volume).
It should not be necessary to control the volume manually. However, in addition to controlling listen-
ing programmes, the multi-function button (62 models only) provides you with the ability to adjust the
amplification to your liking.
Your hearing care professional can configure your multi-function button so that you can control the
volume and switch between listening programmes.
Push button (61 models only)
Multi-function button (62 models only)
If necessary, your hearing care practitioner can change the default settings for the multi-function but-
ton and fill in the following table to indicate the new settings:
Multi-function button action
Default setting
New Setting
Short press up
Increases volume
Short press down
Decreases volume
Long press up (3 seconds)
Changes programmes
Long press down (3 seconds)
Activates streaming
