(198IO) AUTO CLEANER ENGLISH SIZE: 4.875” X 7.25” PANTONE 295U 06/29/2016
S AVE THESE INSTRUCTIONS
English
198A
Page 5
Please read, understand, and follow all instructions carefully before
installing and using this product.
General
•
The Auto Cleaner must be connected to a filter pump with a flow
rate between 1600 - 3500 gallons/hour (6056 - 13248 liters/hour).
•
The cleaning performance depends on the filter pump flow rate,
the higher the flow rate the better the performance.
•
First assemble your filter pump and then set up the auto cleaner.
•
If using a sand filter, ensure the sand media is clean by
backwashing it first. Run the filter pump for 10-15 minutes before
connecting the auto cleaner to the water return connector.
•
The auto cleaner will not be operated if the filter pump is not
operating.
SETUP INSTRUCTIONS
IMPORTANT PREPARATION INFORMATION
