192
PO
S AVE THESE INSTRUCTIONS
(192PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 04/18/2013
English
Page 15
MAINTENANCE (continued)
1.
Drain and clean the spa following the “Spa Tub Drainage” and “Spa Tub Cleaning” sections.
2.
Reverse set up instructions to deflate and disassemble the spa tub, spa control unit and spa cover air
bladder.
3.
Make sure all the spa components and accessories are thoroughly clean and dry before storage. Air-dry the
spa tub in the sun for an hour before folding.
4.
Fold the spa tub loosely and avoid any sharp corners to prevent damage or leakage to the spa tub liner.
5.
Prepare additional new cartridges for next time use.
6.
Store the spa tub and accessories in a dry, temperature controlled, between 32º – 104 ºF (0º – 40ºC),
storage location.
7.
The original packing can be used for storage.
STORAGE
Spa Tub and Cover Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
•
Clean and dry the area to be repaired thoroughly.
•
Remove the patch backing paper and press patch firmly over the puncture.
Smooth out the surface to remove any air bubbles under the patch.
