192
PO
S AVE THESE INSTRUCTIONS
(192PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 04/18/2013
English
TROUBLESHOOTING
FILTER PUMP DOES
NOT OPERATE
NOT HEATING
PROPERLY
BUBBLE AIR BLOWER
DOES NOT WORK
WATER FILTRATION
NOT WORKING
WATER NOT CLEAN
PUMP ADAPTERS ARE
NOT LEVEL WITH THE
SPA ADAPTERS
TUB HAS GOT A
STRANGE SHAPE
TUB LOOSES AIR
PRESSURE
SPA LEAKING
• Power failure.
• GFCI/RCD tripped.
• GFCI/RCD broken.
• Temperature set too low.
• Dirty filter cartridge.
• Heating element failed.
• Pump is too hot.
• Dirty filter cartridge.
• Insufficient filtering time.
• Dirty filter cartridge.
• Improper water maintenance.
• One characteristic of PVC is that
it changes shape, which is normal.
• Extra air pressure by strong sunshine.
• Air valve looses.
• Hole or split on spa tub.
• Spa control unit inlet/outlet connections
not securely tight.
• Spa control inlet/outlet o-ring missing.
•
Check power source.
•
Reset the GFCI/RCD.
•
Contact Intex Service Center.
•
Set to a higher temperature.
•
Clean or replace the filter cartridge in time.
•
Contact Intex Service Center.
•
Unplug the pump.
•
Contact Intex Service Center.
•
Clean or replace the filter cartridge in time.
•
Increase filtration time.
•
Clean or replace the filter cartridge in time.
•
Refer to the chemical manufacture’s instructions.
•
Elevate the pump with wood or another type of
insulated material to bring the pump’s adapters
level with the spa’s adapters.
•
Please check the air pressure and release air if necessary.
During very hot weather, you must check to see whether it is
necessary to release some air. This is to avoid any possible
damage to the tub.
• Fill up the inflatated tub with air, then make sure the air valves
are secure, replace it if necessary.
• Put liquid soap and water in a squirt bottle and spray on
seams. If there is a leak it will bubble. After you find the leak,
clean and dry the leaking area, then apply the repair patch
that comes with your spa.
• Tighten inlet and outlet connections.
• Coat the o-ring with petroleum jelly for water proof.
• Ensure o-ring is in place and not damaged.
PROBLEM CAUSE SOLUTION
MAINTENANCE (continued)
Page 16
IMPORTANT
The ambient temperatures of air have an effect on the spa tub internal pressure. Air inside of the
spa tub may expand and contract with varying temperature leading to reduce pressure inside
of the spa tub. If this occurs, simply use the provided pressure gauge to check the internal air
pressure and add more air if necessary.
