133
SAVE THESE INSTRUCTIONS
Page 10
(133) MODEL CS8111 SALTWATER SYSTEM & FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 11/17/2011
English
PPRR
OODD
UUCC
TT
IINN
FFOO
RRMM
AATT
IIOO
NN//
SSPP
EECC
SS
This product is specially designed for above ground pools. It will destroy the
bacteria, oxidize bather organics and control algae, which provide a safe, clean and
comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chlorine.
During the installation of your Saltwater System/Filter Pump, a measured quantity
of salt is dissolved in the pool water to make it slightly salty. The pool water flows
through the saltwater system’s electrolytic cell to produce HCLO. The HCLO
dissolves in the water and instantly starts destroying bacteria and algae. It
also oxidizes all other organic materials.
Low voltage direct current is applied to the copper electrode, and copper ions are
generated and dissolved instantly in the water. Copper is an effective algaecide,
which will prevent algae from growing in the pool.
HOW SANITIZER IS GENERATED
Power:
110 - 120 Volt
Amperage:
Saltwater System - 1.1 A; Filter Pump - 2.4 A
Wattage:
Saltwater System - 125 W; Filter Pump - 275 W
Ideal Salt Level:
3000 ppm (parts per million)
Maximum Sanitizer Output/hour: 12 grams/hour
Copper Ionizer Output Current:
175 mA
Limited Warranty:
see “Limited Warranty”
HOW COPPER IONS ARE GENERATED
PRODUCT SPECIFICATIONS
Flow Sensor
Electronic
Control Station
Electrolytic Cell
Water Outlet