PAGE
47
OWNER’S MANUAL
STORAGE AND MAINTAINING
APPEARANCE
Washing the Vehicle
Keeping your vehicle clean will not only improves its
appearance but it can also extend the life of various
components.
NOTICE:
High water pressure may damage components, including
wheel bearings, radiator, transmission seals, brakes,
plastic panels, safety labels, electrical switches, electrical
components and wiring. Wash the vehicle by hand or with
a garden hose, using mild soap.
NOTICE:
Certain products, including insect repellents and
chemicals, will damage plastic surfaces. Do not allow
these types of products to contact the vehicle. Clean
vehicle with automotive soap and water.
NOTICE:
Mud can stain the vehicles seat and plastic. Immediately
wash mud off vehicle with mild soap and water.
Tips
•
Avoid the use of harsh cleaners as they can
scratch the finish.
•
Do not use a power washer to clean the vehicle.
•
Do not use medium to heavy duty compounds on
the finish.
•
Always use clean, microfiber cloths, towels and
pads for cleaning and polishing. Old and reused
cloths and pads may contain dirt particles that
will scratch the surface.
•
Grease all zerk fittings immediately after
washing. Allow the engine to run for a while to
evaporate any water that may have entered the
engine or exhaust system.
•
If any informational or warning label becomes
illegible or comes off, contact your Intimidator
dealer to order a replacement label.