INDUSTRIAL SHREDDER
Instruction manual for use and maintenance
MSM0005EN_
F
46 / 90
4.
INSTRUCTIONS FOR INSTALLATION
4.1
PACKING, HANDLING, SHIPMENT AND TRANSPORT
4.1.1
Packing and shipment
The shredders of this series on shipment are typically fully assembled, given their small size.
The machine, depending on the case, is delivered in one of the following arrangements:
1.
For national transport normally sufficiently blocked and covered on a truck, unpacked.
2.
In a normal crate internally lined with tarred paper and blocked on a pallet for transport by sea.
3.
In a crate internally lined with polythene sheets for road transport in Europe.
4.
In containers with antirolling internal stops.
The choice between the above listed solutions depends on the transport distance, the client's orders
and the lying time of the packed machine.
For types 2-3 (step above), an adhesive label is stuck onto 2 sides of the packaging which shows the
following data:
•
Destination;
•
Weights. net – gross – tare;
•
Bulk: length – width – height;
•
Packing list carrier label (copy of the Packing-List inside the crate fixed to the machine).
