INDUSTRIAL SHREDDER
Instruction manual for use and maintenance
MSM0005EN_
F
48 / 90
4.1.3
Unpacking
Open the packing, check the conformity of the components and verify their integrity.
The packaging material disposal is the addressee's responsibility and must be carried out according to
the regulations in force in the Country where the shredder is used.
Once the packaging has been removed, no mishandling should be evident. If this is not the case, inform
the Manufacturer’s Assistance Service.
4.1.4
Prearrangements for installation
Before starting assembly operations, make sure that the flooring can sustain the shredder's weight
(see Table 3-1 – Weights) also considering the coefficient of security stated by the regulations in force.
The shredder must be installed on a suitable site, such as to allow normal machine running operations
and routine maintenance (see the attached drawing and paragraph 2.7.2 Installation site). A minimum
room of 600 mm must be kept free all around the shredder.
CAUTION
The shredder user has to protect the mains to the electric switchboard by means
of fuses suitable to feed three-phase electric motors, rated as reported in the
electric component list enclosed in the present manual.
DANGER
To handle the shredder’s components, use the following means: a fork lift truck
or a trans pallet for the hopper and the supporting stand a crane for the shredding
chamber. These lifting means must be in perfect working condition: the supplier
declines any responsibility concerning the conditions and suitability of the
handling means used. The load capacity of the above lifting means must suit the
bulk to be moved. The movement should come about slowly, in sufficiently lit
circumstances, with enough free space in the installation area.
DANGER
For no reason are the personnel allowed to pass under the load or nearby it. Not
even the signalling operator, who must provide assistance during the handling
operations. The supplier declines any responsibility concerning this stage, which
must be carried out by personnel qualified for handling industrial machinery
(forklift operators, sling operators), duly equipped with the necessary individual
protection (overalls, accident prevention footwear, work gloves, safety helmet,
glasses).
