INDUSTRIAL SHREDDER
Instruction manual for use and maintenance
MSM0005EN_
F
82 / 90
7.3.8
Check and inspection of the blades pack HDD GLADIATOR series
Being the loading hopper completely closed, it will not be possible to check the blade set condition
from the outside. For this reason the hopper is hinged so that it will be possible to tilt it. In this way it
will be possible to reach the shredding chamber only after having removed the screws blocking it. The
opening sequence follows:
1. Remove the 6 M8 screws blocking the
hopper.
2. Tilt the cover hopper.
3. Check the shredding chamber.
3. After the check close the cover hopper and
tighten the hopper screws.
IMPORTANT NOTICE
Above sentence can be carried on only by service and maintenance team.
DANGER
The hopper is equipped with a safety switch that stops the shredder when the
hopper is opened. Anyway before opening the hopper turn the main switch.
