Operation Manual 5280 EPSP
12
2.3 Requirements for the operator's workplace.
The user is obliged to create working conditions at the cutter workplace that preclude
the operator from slipping, slipping or falling due to poor ground conditions, the way
of routing the wires or the lack of convenient access!
2.3.1 Personal protection equipment
If necessary or if it results from the regulations in force, use the following personal protective
equipment:
•
Wear safety shoes
•
Wear safety goggles - eg when cutting fragile material
•
Use hearing protection - eg when cutting hard material
2.3.2 Permissible environmental and operational conditions
•
Operation of the machine is permitted in closed rooms
•
Humidity: 35% - 95% (non-condensed)
•
Ambient air temperature: + 5 ° C - + 30 ° C
2.4 Expected risks when operating the cutter
Using the single cutter as intended, you can predict some of the risks to your life and
health. To avoid existing hazards, the rules of using and operating the cutter must be
explained in detail. Special attention should be paid to the cutter units and situations
posing a threat to the operator and third parties:
DANGER!
The operator can operate the machine in good technical condition.
At the beginning of each work shift and after each knife replacement, check the operation of
the safety devices. Interference in security or bypassing them (eg safety light curtains, two-
handed controls) creates a danger to life or injury!
At the moment, the cutter can only support one operator!
The operator himself must also make sure that the machine is not operated by unauthorized
persons!
