Operation Manual 5280 EPSP
11
2.2 Employee qualifications
•
The guillotine can only be operated by qualified employees who have been properly
trained by the cutter manufacturer. With regard to safety rules, in the contents of this
instruction, by a qualified employee should be understood as a person authorized to
set machines, circuits and electrical circuits in accordance with the standards of
security technology.
•
The guillotine should only be operated by employees trained and authorized for this
purpose by the employer.
Such employees must be of legal age.
•
An operator who does not use the language of the available version of the user
manual in speaking or writing, should be fully instructed in verbal instructions and
complete comprehensive and practical training to familiarize with the content of the
document.
This requirement is especially important for chapter "Safety of use".
The manufacturer recommends that the operator be given the translation of "Safety of
use" in his mother language with confirmation of receipt of such a document.
Info
Before operating the cutter the operator must read the operating
instructions.
•
Every employee delegated to work during assembly, disassembly, reassembly,
commissioning, servicing and maintenance (technical inspection, servicing, repairs) of
the cutter must read the entire operating manual, in particular the chapter "Safety of
use".
•
The manufacturer recommends that the buyer of the machine, transferring it for use,
obtained a written confirmation of the contents of the instructions.
•
Every employee authorized to perform assembly, start-up, operation and
maintenance and repair of the cutter must read the entire operating manual, in particular
the chapter "Safety rules".
