Operation Manual 5280 EPSP
9
employee is also obliged to train respectively the the operators of the machine according to
the manual. Each operator should confirm receiving of the manual and sign the obligation to
respect it. The requirement is necessary to start working on the machine.
2. SAFETY OF USE
The elements of mechanics, electronics of the guillotine are made according to latest
solutions and general rules of technology to secure the operator in case of failure. The
adequate level of safety elements ensure operator safety. It is necessary to check with
manufacturer if user wants to use special, extra equipment which was not installed and
delivered by manufacturer. Otherwise the factory warranty is no longer valid and
manufacturer takes no responsibility for modifications done in the machine and damages
cause by such.
This requirement is also applicable to the spare parts used during the repairs!
The repairs should be made only by servicemen who were trained by the manufacturer. In
case of the repairs done by unauthorized service the warranty given by manufacturer is not
valid and manufacturer is no longer responsible for any damages.
•
Warranty is terminated if the machine is modified by user without any
permission of manufacturer.
•
Modification by user removes all responsibility from the manufacturer for any
damages.
Despite all precautions the operating of the machine by not trained staff or wrongly trained
can cause the risk of damage.
Each person present during the installation, maintenance and usage of the machine must be
familiar with the manual, especially the chapter Safety of use.
Despite the obligation to do it prior using the machine such means should be also repeated!
Possible effects of incorrect usage:
•
risk of life
•
risk of body damage
•
risk of machine damage
•
risk of deterioration of technical condition of machine
