Operation Manual 7310 EPSHP
19
DANGER!
Protect the power cables from sharp tools, high temperature and oil.
3.4 Setting the cutter
Figure 7 Adjusting the cutter setting.
The cutter does not need to be attached to the ground. The correct and safe setting of the
machine is achieved by turning the adjusting foot 1, and locking its position with the nut 2, as
shown in Figure 7.
Summary of Contents for INT-GU-07310EPSHP
