Operation Manual 7310 EPSHP
36
7.5.3 Rules for selecting the contact pressure.
The value of pressing force is selected experimentally, in relation to the type, width and
height of the cut material.
The following rules must be observed:
- the higher the pile, the greater the downforce
- the greater the cutting width, the greater the downforce
- the harder the material, the greater the downforce
7.6 Cutting line indicator (optical)
The cutter is equipped with an optical cutting line indicator. A thin light line indicates the
cutting line on the material to be cut.
7.7 Cutting (pressing and cutting)
DANGER!
Do not put hands into cutting zone!
Fig. 19 Operating and signaling elements used during cutting.
Summary of Contents for INT-GU-07310EPSHP
