Preface and general information
7
i
BA 14.105/115 EN 2.0
1.3
Drive systems
1.3.1
Labelling
•
Drive systems and components are clearly labelled and defined by the indications on the
nameplates.
•
Manufacturer:
INTORQ GmbH & Co. KG
Postfach 11 03
Wülmser Weg 5
D-31849 Aerzen
D-31855 Aerzen
•
Clutches and brakes are supplied as individual parts. The user combines them as desired.
Specifications, especially packing stickers, nameplate and type code are valid for the entire
stator.
•
If individual parts are supplied, there is no identification.
1.3.2
Application as directed
•
Drive systems
– are to be used in machines and systems.
– are only to be used for the ordered and acknowledged application conditions.
– must only be operated under the conditions prescribed in these Instructions.
– must not be used at powers higher or lower than indicated in these Instructions.
Any other use shall be deemed as inappropriate!
1.3.3
Legal regulations
Liability
•
The information, data, and notes in these Operating Instructions met the state of the art at the
time of printing. Claims on modifications referring to controllers which have already been
supplied cannot be derived from the information, illustrations, and descriptions.
•
Lenze does not accept any liability for damage and operating interference caused by:
– inappropriate use
– unauthorized modifications to the drive system
– improper working on and with the controller
– operating errors
– disregarding these Instructions
Warranty
•
Warranty conditions: see Sales and Delivery Conditions of INTORQ GmbH & Co. KG.
•
Warranty claims must be made to the INTORQ representative responsible for you immediately
after detecting defects or faults.
•
The warranty is void in all cases where liability claims cannot be made.
