KIO420L - OPENING SIDE PANEL
4x M4 Allen Key Screws
To access the inside of the kiosk
you will need to remove the four
screws shown using an allen
key. (Note: Make sure to support
the pannel while removing the
screws so it does not fall)
SCREEN MOUNTING
Note:
When lowering the screen into place be careful
not to clamp any of the cables between the screen
and the kiosk housing.
Step 1.
Position the screen in the same
orientation shown in the diagram
with cables pointing down.
Step 2.
Connect your cables outlined in
cabling information.
Step 3.
Lower the screen onto the threaded
studs (being careful to not clamp
any cables) and tighten the wing nuts
to fix the screen in place.
Summary of Contents for KIO420L
Page 1: ...KIO420L USER MANUAL...
