3
Operation
Installation
87
85
86
87a
NA
30
To ACC Input of Camera
GND
Vehicle
Reverse Lamp Wire
ACC Input
(From Vehicle)
Mirror
Camera
Black-Ground
Video 2 (To Camera)
Video 1 (Additional Input)
Black-Ground
Red-Accessory
Red-From 87 of Relay
RCA Output to Video
2 Input of Mirror
Bluetooth Setup / Operation
1. While using the Video 1 Input, you can press the Power button to turn the monitor ON/OFF
2. While using the Video 2 Input (Backup Camera), you can press the Power button for 1.5 seconds to turn
the monitor ON/OFF, or use a short press to adjust the image brightness.
1. Remove OEM mirror and replace with supplied LCD mirror.
2. Run your wiring harness into the headliner and down the vehicles A-Pillar, making sure to
avoid any factory airbags. Secure your wiring with zip-ties.
3. Make all necessary wiring connections (See wiring diagram - make sure to use a relay)
1. Go to your phone’s Bluetooth Settings and search for “Car Kit.” Once you’ve selected the
device, you will be prompted for a password. The password is: 1234
2. When the phone has successfully paired, a Bluetooth icon will appear in the top left corner
of the mirror’s display.
3. When you receive a phone call, the monitor will display the number of the incoming call.
you can answer by pressing the Phone Button. To hang up the call, simply press the Phone
Button.
Note: This system will not display the Caller ID.
