LSI Logic Corporation
Page 13 of 56
Features
Following is a list of the Gigabit Ethernet PCI adapter features:
ITI-5100G and GF Models
•
=
Full-duplex Gigabit Ethernet interface (IEEE P802.3-1999)
•
=
Jumbo Frame support (optional 9,000 byte frames for server-
to-server traffic)
•
=
Standard Ethernet frame size (up to 1518 bytes)
•
=
Dual Homing for automatic failover if a port, switch, or
adapter is down
•
=
VLANs: up to 64 VLANs per adapter using IEEE 802.1Q-
1998 tagging
•
=
Adaptive interrupt frequency (maximizes network
throughput; adapts to traffic load)
•
=
Dual DMA channels
•
=
33/66 MHz, 32-bit or 64-bit PCI bus master with adaptive
DMA
•
=
Universal dual voltage signaling (3.3V and 5V)
•
=
PCI Local Bus Rev 2.1 compliant (6.8"x 4.2")
•
=
ASIC with on-chip MAC and dual RISC processors
•
=
Status LEDs
ITI-5100G Model
•
=
CAT-5 compatible twisted pair Ethernet Connector
•
=
Interoperability with existing Ethernet and Fast Ethernet
Equipment
ITI-5100GF Model
•
=
Duplex SC fiber-optic connector
Key Protocols and Interfaces
ITI-5100G/GF adapters are interoperable with existing Ethernet equipment
assuming standard Ethernet minimum and maximum frame size (64 to 1518
