Specification
Accessories
Install the indoor monitor
How to install the indoor monitor?
NOTE ON WIRING CONNECTION
Please note the silk printing marked on PCB in order to avoid incorrect connecting.
The wiring connection
:
requirement
1. 4C ordinary non-STP wiring cable;
3
4
Transmission
≤
28m (4x0.2mm )
2.
rom the outdoor camera to furthest indoor monitor:
Effective distance f
Transmission
≤
50m (4x0.3mm )
Transmission
≤
80m (4x0.5mm )
2
2
2
Monitoring
Unlock
Talk
Hang up
1
2
Monitoring
Unlock
Talk
Hang up
1
2
236mm
TF
143mm
19mm
Display screen
Definition
Standard
Calling mode
Calling time
Standby current
Work current
Power supply
Work temperature
Installation way
Built
-
in storage
Picture format
7"TFT LCD
screen
PAL/NTSC
Two-way conversation
120
s
Maximum
2
0
0
MA
Maximum 500MA
Surface
mounting
JPEG
standard format
SD
card
(
maximum 32
GB)(>
CIass 10
）
Extension memory
800(H)X480(
V
)
Yes
Built-in power supply--optional
-
10 C~+60 C
External switching power
supply(DC12V)--optional
Screw anchors
cables
Bracket
Wall screws
Monitoring
Unlock
Talk
Hang up
1
2
(Optional)
Indoor monitor --------------------------------------------------------------------------------- 1pcs
Screw anchors --------------------------------------------------------------------------------- 4pcs
Wall screws ---------------------------------------------------------------------------------- 4pcs
Bracket ------------------------------------------------------------------------------------------ 1pcs
4 Pin line --------------------------------------------------------------------------------------- 6pcs
2 Pin line --------------------------------------------------------------------------------------- 1pcs
User manual ----------------------------------------------------------------------------------- 1pcs
External switching power supply DC 12V(
optional, please check actual model
)------1pcs
The electric lock/source/camera is not include in the package, you can purchase an electric lock
that
is suitable for your need
s
.
A standard
relay mechanism
supports locks with Normally Open (N.O.) door
unlocking method
s
.
This
means that in the normal state the dry contact is opened so
the lock is kept under constant closed state. If the unlocking push-button is pressed
and the dry contact is changed to closed, then the lock is released.
The indoor monitor with a built-in power supply or an external switching power supply
is optional, please refer to
the manufacturer
.
Th
e device with a built-in power suppl
y
is
applicable to wide voltage range(AC 100V~240V). Please first pull out the AC
power plug before installation of the device(shown
below).
