Both the visitor's voice and image will continue to display for 20 seconds after the door has been
unlocked. This is to ensure successful entry.
For the models with SD card
(
when the doorbell
starts
record
ing)
:
From
the start of
a call, the
whole process will be recording. When the doorbell record
s
for the snapshot mode
,
the first
picture will be captured onto the built-in storage of the device
In the monitoring state, the device can listen to the sound of the outdoor bell
. The
user can press
the button “ ” to convers
e
and press the button “ ” to unlock.
9
10
Talk
Option in the
menu
settings
:
DOOR1, CAM1, DOOR2, CAM2 operating mode (open or closed)
Standby Mode
Press the call button
Call Outdoor
Press the
hang up button
to end the call
CAM1
Monitoring
Show
CAM1
image
DOOR1
Monitoring
Show DOOR1
image
DOOR2
Monitoring
Show DOOR2
image
CAM2
Monitoring
Show CAM2
image
Standby
Monitoring
Close LCD
Each monitoring time is 60S
Hang up
MONITORING
NOTICE:
If you are using only one outdoor camera in monitoring mode, you can also end the
monitoring mode by pressing the monitoring button again
(
Must be Close CAM1;
DOOR2; CAM2 in the menu option
).
If a conversation with outdoor unit is underway in monitoring mode, a visitor
can
press the
call button on either of outdoor unit
s and
the monitoring mode will be switched off
. T
he
visitor’s image will
then
appear on its screen and continuous ringing will be heard. If you
are using the indoor unit with hands-free, you can press the talking button to reactivate
conversation with the visitor.
Unlock
Press the unlock
button on the indoor unit,
the electric lock will be opened.
Internal communication function requires at least two indoor and one outdoor units to be connected.
转呼功能
Outdoor camera call indoor
monitor and conversation
is underway
Press this button
to activate the function
of
call transfer to
other extension
A continuous
ringing
tone is
heard
NOTICE:
When you are transferring a call to other extension, the original
conversation indoor unit will return to standby mode, and the
indoor unit which the call is being transferred will also sound a
continuous Ding Dong tone and the video image will appear on
its screen.
Press the
talk
button on any
indoor unit
Talking
with visitor
At least 2 indoor units
are
required
.
Standby
Mode
Press the
Transfer Call
button
Press the
talk
button on any
indoor unit
Start conversation
among indoor units
.
Press
Hang
up button
End
The Electric
lock can
be opened
End the call
and return to
standby mode.
Hang up
Unlock
Talk
CALL TRANSFER TO OTHER EXTENSION
Talk
Hang up
INTERNAL COMMUNICATION AMONG INDOOR UNITS
A continuous
ringing
tone is
heard
