13
14
Ring select
Ring volume
Return
Door1 12
Door2 01
Return
[Format flash]:
This option is to format built-in storage of the indoor monitor.
[Backup pictures]:
For the models with SD card
_
backup the photos on the built-in
storage device to SD card manually, and the photos stored on the
device will be deleted. The photos
that
backup onto the SD card
need to be viewed on PC.
(Plug SD card into PC to view)
[Update]
: For the models with SD card, users can upgrade the firmware of the device
via SD card.
Note: During the system upgrading, don’t remove the SD card or turn the indoor
device
off
. After completing the upgrade, the device will restart.
[Reboot]
: Move the cursor to “ ”, and press “ ”. It will pop-up a window, choose
“Yes” to restart the machine, choose “NO” to cancel.
[Return]:
Exit the current menu.
2. Set the tone parameters
On main menu, move the cursor to the option “Ring”, then press “ ” to enter the
“Ring” menu. Ring setup includes: “Ring select” and “Ring volume”.
2.1 Ring – Ring select
On ring menu, move the cursor to “Ring select” and press “ ” to enter the “Ring select”
menu to set up the doorbell tone of the outdoor camera.
2.2 Ring – Ring volume
On ring menu, move the cursor to “Ring volume” and press “ ” to enter the “Ring
volume” menu to set up the ring volume. Users can set up different ring volume during
three different time period,
the
vibrate and ring time can be adjusted from 10s to 45s
when calling.
[Door1]
: To set up the doorbell tone of the outdoor camera 1
(
total of 12
).
[Door2]
: To set up the doorbell tone of the outdoor camera 2
(
a total of 12
).
[Return]
: Exit the current menu.
[Ring Vol1]
: the
volume
level of
Ring Vol1: 00
-
10.
[Ring Vol2]
: the
volume
level of
Ring Vol2: 00
-
10.
[Ring Vol3]
: the
volume
level of
Ring Vol3: 00
-
10.
3. Set the mode of the indoor monitor
On main menu, move the cursor to the option “Mode”, then press “ ” to enter the
“Mode” menu.
[Mode]
: Options include “Master” and “Slave”. “Master” indicates that the indoor unit
connects the outdoors or cameras, “Slave” indicates that the indoor unit
connects the main or sub indoor unit.
[Door2 status]
: Enable or disable the preview of Door2.
[Record mode]
: For the models with SD card, options include “Record” and “Snapshot”.
“Record” indicates that the device with SD card will start record
automatically when a visitor press the call button on the outdoor
camera. “Snapshot” indicates that the device will capture a frame of
the video stream as a still photo if a visitor press the call button on the
outdoor camera.
[Door1 Unlock Time]
: From 02 seconds to 10 seconds.
[Door2 unlock time]
: From 02 seconds to 10 second.
Ring vol1: 06:00~12:00 09 30s
Ring vol2: 12:00~18:00 08 30s
Ring vol3: 18:00~06:00 07 30s
Return
Mode:
Master
Door2 status:
On
Record mode:
Snapshot
Door1 unlock time: 02 Second
Door2 unlock time: 02 Second
Return
